Lemontron rev e arrow_right Bom arrow_right Hardware arrow_right Bowden Tube
Bowden Tube

Bowden Tube

×1 $1.6
  1. The Bowden tube on the Lemontron should be 44cm long. It’s not important to be precise here.
  2. A second tube is used to guide the filament into the Lemontron. An integrated knife slot if used to cut it during installation.

Product Details

Capricorn tubes has a smaller inner diameter which means less snags and higher print accuracy.

Dimension Measurement
Outer Diameter 4mm
Inner Diameter 1.9mm