Lemontron rev e arrow_right Bom arrow_right Electronics arrow_right Power Supply
Power Supply

Power Supply

LOP-300-24

×1 $42.85

Required Modification

  1. Modify PSU

    Bevel the two corners of the PSU that face outwards. The cut should bisect the screw post holes.

Product Details

The following substitute PSU’s also work: LOP-300-27, LOP-200-24, LOP-200-24. LOP and EPP variants are dimensionally quite similar.

If you are converting a JourneyMaker, you can re-use the EPP-200-24 PSU. However, the transformers tend to be installed sloppily at a slant, which requires snipping off the top of the plastic casing to allow the top plates to sit flush.